Furnace Repair in Vaughan

Book furnace repairs in Vaughan with North Wind HVAC today! We offer same-day services and 24/7 appointments for emergency repairs. Call us today!

Same-Day Services

Emergency Furnace Repair Services in Vaughan

Are you searching for emergency furnace repairs in Vaughan? At North Wind we offer same-day furnace repairs throughout Vaughan, with options for 24/7 appointments. No matter what time of day or night you call us, we will dispatch a technician to come and quickly repair your furnace on-site, performing a complete diagnostic check to ensure everything is working as it should before they leave.

Free estimates
Same-day service
24/7 emergency support
Repair all furnace makes and models
1 month service warranty – if the problem persists, we will return to fix it for free!

Common Furnace Problems (And How To Fix Them)

After 30 years of repairing furnaces throughout Vaughan, we have come across a number of common issues. Below we have outlined the possible causes and troubleshooting methods you can try before you give us a call. If the issue persists please give us a ring to schedule one of our repair specialists.

1. Furnace Not Producing Heat

Thermostat settings incorrect: Ensure the thermostat is set to “Heat” and the temperature is above room level.
Clogged air filter: Check and replace a dirty air filter to restore airflow.
Pilot light or ignition issues: If the pilot light is out, relight it following the manufacturer’s instructions.
Gas supply problems: Ensure the gas valve is open and check for any disruptions in the gas supply.

2. Furnace Blowing Cold Air

Thermostat fan set to “On” instead of “Auto”: Switch the thermostat fan setting to “Auto” so it only runs during a heating cycle.
Dirty flame sensor preventing ignition: Clean the flame sensor using a soft abrasive pad (turn off power before doing so).
Pilot light issues: If the pilot light won’t stay lit, the thermocouple may need replacement – contact a technician.

3. Furnace Turning On and Off Too Frequently (Short Cycling)

Dirty air filter restricting airflow: Replace a clogged air filter to improve airflow.
Oversized furnace cycling too quickly: If the furnace is too large for your home, consider consulting a technician about proper sizing.
Thermostat placement near a heat source: Move the thermostat away from direct sunlight or heat sources.

4. Furnace Not Turning On Automatically

Tripped circuit breaker: Check the breaker panel and reset any tripped switches.
Malfunctioning thermostat: Replace the thermostat batteries and ensure it’s set correctly.
Blocked condensate drain: Inspect and clear the condensate drain if it’s clogged.

5. Loud or Unusual Noises (Banging, Squealing, Rattling)

Loose internal components: Tighten loose panels and screws on the furnace casing.
Worn-out blower belt: Replace a worn or loose blower belt if squealing occurs.
Delayed ignition causing mini-explosions: If you hear loud bangs before the furnace starts, shut it off and call a technician – it may be a delayed ignition issue.

6. Blower Fan Running Constantly

Thermostat set to “On” instead of “Auto”: Change the thermostat fan setting to “Auto” so the blower only runs during heating cycles.
Faulty limit switch: If the blower continues running, a faulty limit switch may need to be replaced—call a professional.

7. Water Leaking from the Furnace

Clogged condensate drain: Flush out the condensate drain with warm water and vinegar to remove blockages.
Broken heat exchanger: If the heat exchanger is cracked, shut off the furnace immediately and call a professional.
Humidifier leak: Inspect the built-in humidifier for leaks and replace faulty parts if necessary.

8. Weak or No Airflow from Vents

Dirty air filter: Replace the air filter if it’s clogged.
Blocked or leaky ductwork: Ensure all vents are open and clear of obstructions.
Faulty blower motor: If airflow remains weak, inspect ductwork for leaks or damage – sealing leaks may improve performance.

9. Pilot Light Won’t Stay Lit

Dirty or damaged thermocouple: Clean the thermocouple with a fine abrasive pad and ensure it’s positioned properly.
Weak gas supply: Check that the gas supply valve is fully open.
Drafts affecting the pilot flame: If drafts are blowing out the pilot light, consider shielding it or relocating the furnace (consult a technician).

When You Book With Us

What To Expect From Our Vaughan Furnace Repairs

When you book a furnace repair service with us you can expect the following:

Detailed diagnostic and safety check of your furnace appliance
In-depth explanation of the problem and repair strategy
If possible, we will complete on-site furnace repairs, or for more complicated issues we will schedule a follow up appointment and explain the required repairs
1 month service warranty – if you experience further issues within 1 month of your furnace repair service with us, then we will come back for free.

FURNACE REPAIR

Frequently Asked Questions

How often should I schedule furnace maintenance?

It is encouraged to arrange furnace maintenance at least once per year. Ideally, it is recommended to schedule the maintenance before the start of the heating season.

What are the signs that my furnace may need repairs?

Typical indications comprise inadequate generation of heat, peculiar sounds while functioning, frequent on and off cycles, limited air circulation, uncommon smells, and elevated energy expenses.

Can maintenance help avoid furnace malfunctions?

Consistently maintaining your furnace greatly reduces the chances of unexpected malfunctions. Regular inspections, cleaning, and servicing aid in identifying and resolving possible problems before they worsen, enhancing the dependability and efficiency of your furnace.

On average, how much time does it usually take to repair a furnace in Vaughan?

The length of time needed for a furnace repair relies on the particular problem and the necessary fixes. Certain issues can be resolved within a few hours, whereas others might require more time. Our skilled technicians in Vaughan can offer a more precise estimate once they evaluate the situation.

What steps can I take to maintain my furnace between professional services?

You can contribute to the upkeep of your furnace by regularly replacing or cleaning the air filters, ensuring the area around the furnace remains clean and unobstructed, and staying alert to any abnormal signs or sounds. However, professional maintenance remains essential for achieving optimal performance. Our furnace experts in Vaughan would be delighted to assist you further with this matter.

How long can I expect my furnace to last before needing replacement?

The lifespan of a furnace can differ based on factors such as maintenance, usage, and quality. On average, a well-maintained furnace can endure for approximately 15 to 20 years. However, older furnaces may experience decreased efficiency and may require replacement earlier.

Can a furnace repair improve energy efficiency?

Indeed, in numerous instances, a furnace repair can enhance energy efficiency. Resolving problems such as malfunctioning components, airflow limitations, or defective thermostats can assist the furnace in operating more efficiently, leading to savings in energy consumption.

Do you offer emergency furnace repair services?

Absolutely, we provide emergency furnace repair services in Vaughan. Get in touch with our team to schedule your appointment. Rest assured, we are here to assist you.

Are your Vaughan furnace repair technicians licensed and certified?

Certainly, all of our furnace repair experts are licensed, certified, and highly qualified to meet all your repair requirements. You can trust in their expertise and skills to provide the assistance you need.